24/7 call center · California and New Jersey

Red Electricians technician checking an exterior electrical panel at a Burbank home
Home › Burbank Electrician

Electrician in Burbank, CA

Red Electricians is a licensed electrician that serves Burbank, CA. Burbank is in the service area of our Sherman Oaks Google profile, and we have no Burbank office. Panel upgrades start from $699 with a free estimate (starting price; your cost may differ).

Panel upgrades, free estimate
From $ 699
EV charger installation
From $ 399
Outlet repair
From $ 39

Service-area coverage

No Burbank office

Request a service

Request an
electrician in Burbank.

Tell us the address, the problem, a photo of the panel or damage and the time window that suits you. Then call, or send the form.

Call any time, 24/7

(213) 322-0128

Request a Service

Tell us the problem and we will call you back in about 5 minutes.

(213) 322-0128 (general line, not a Burbank office)

What we handle

Electrician in Burbank, CA: what we handle and how to reach us

We do electrical work for Burbank homes and workspaces. Burbank is listed in the service area of our Sherman Oaks Google profile, so that profile is the nearest place to read about us. There is no Burbank office. Call or send the form to ask for a visit.

Same-day service is possible in many cases. Otherwise it is the next day or within a few days. See our full list of service areas.

Services

Electrical services for Burbank homes and workspaces

Every price in this section: starting price; your cost may differ.

Electrical Panel Upgrade

From $699
Free estimate

More capacity for chargers, tools and everything else on the panel. Starts from $699 with a free estimate.

View service →

EV Charger Installation

From $399

A charger on a circuit planned for it. Starts from $399.

View service →

Outlet Repair

From $39

Outlets that are dead, loose or overloaded. Starts from $39.

View service →

Lighting Installation

From $59/fixture

Fixtures and controls that work together. Starts from $59 per fixture.

View service →

Whole-House Rewiring

From $2,999
Free estimate

New wiring for an older home. Starts from $2,999 with a free estimate. As an electrical contractor we plan around how you live in the house.

View service →

Circuit Breaker Repair

From $79

A breaker that trips or will not reset. Starts from $79.

View service →

Pricing

Starting prices for common electrical work

How much does an electrician cost in Burbank? These are the starting prices for each service. They are not Burbank totals.

Every price in this section: starting price; your cost may differ.

Service Starting price What changes the final price Estimate
Panel upgrade From $699 Panel size and the number of loads Free estimate
EV charger installation From $399 Charger model and cable route Quoted on the call
Outlet repair From $39 Whether the outlet or the wiring is at fault Quoted on the call
Lighting installation From $59 per fixture Fixture type and controls Quoted on the call
Whole-house rewiring From $2,999 Size and age of the home and access Free estimate
Circuit breaker repair From $79 The breaker and the circuit it protects Not free; free estimate applies to breaker replacement only

On our Burbank jobs, the number of loads, access to the room and protecting stored equipment during work moved the price most. Commercial electrical services start from $69 per hour.

Local conditions

Planning electrical work around Burbank workspaces and homes

Our Burbank work has been scheduled around production calls. In one production office, the preparation period set both the access window and the load we had to design for, and battery storage had to be kept clear of work dust.

We do not give Burbank housing, permit or utility facts here. Ask on the call, and we will confirm what applies.

Electrician installing a ceiling fan in a living room

Field notes

Field notes from Burbank: charging-room loads and workshop circuits

✓ Completed Feb 22, 2025

Charging-room loads and workshop circuits

Several camera batteries stopped charging in a Burbank production office when a portable heater was used. Monitoring showed 19.8A sustained on a 15A charging-room branch, because the heater and many chargers shared it. The chargers tested normally, so the layout needed to change, not the equipment. We installed separate supplies for the charging stations and checked the heater connection. The work ran in the evening around the next production call, with the battery storage protected from dust. The branch alterations were permitted with landlord consent, and the final inspection was set before full use.

Many modest chargers can create a substantial sustained demand when a production team plugs in together.

Our electrician from Burbank

Our electrician’s advice: count every charger in use at the same time, not only the largest unit.
✓ Job completed Jul 7, 2024

A rehearsal-room lighting control that confused the fixtures

Saved scenes recalled the wrong output, and replacing every fixture looked tempting. We compared the control with the installed drivers first. The fault was in how the system talked to the fixtures, so we fixed that and kept the units that were in good condition.

✓ Job completed Jan 9, 2025

A home workshop with a soldering station and a fan

We designed the branch and outlet positions around the bench, tested both loads and labeled the supply. Either tool can be unplugged without reaching over a hot iron.

Coverage

Where we work around Burbank and how scheduling works

Burbank is service-area coverage. We have no Burbank office or Burbank Google profile. The number (213) 322-0128 is our general line and not a Burbank office line.

Scheduling

Same-day service is possible in many cases. If not, we come the next day or within a few days. The call center answers 24/7 and emergency service runs 24/7.

Next steps

What happens after you call or send the form

  • Call, or send the form on our contact page and expect a callback in about 5 minutes.
  • Confirm the address, the problem and how we get in. Send photos of the panel or the damage.
  • We agree a time window.
  • The electrician arrives and finds the cause.
  • Free estimates apply only to panel upgrades, panel installation, breaker replacement and whole-house rewiring. Other work is priced on the call.
  • The work is done and tested, and we walk you through it.

Reviews

Customer reviews and where to read them

Burbank has no Google profile of its own, so there is no Burbank rating or review to show. Our nearest profile is Sherman Oaks, and you can read it on the Sherman Oaks page. All reviews are on our reviews page.

Common questions

Burbank electrician questions

Can one power strip handle several chargers?

A power strip’s rating does not raise the capacity of the branch behind it. Count every charger in use together, as in our Burbank charging-room job.

Yes. Burbank is service-area coverage, and it is listed in the service area of our Sherman Oaks Google profile.

Free estimates apply only to panel upgrades, panel installation, breaker replacement and whole-house rewiring. Other work is quoted on the phone.

Turn off what you can safely and call. For urgent faults, see our emergency electrician page. Emergency work starts from $99 per hour; your cost may differ.

It depends on the scope. We confirm what applies with the local authority.

Yes. Red Electricians is licensed and insured. We offer a standard warranty on our work. Ask your technician for the details when you call. More answers are on our FAQ page.

Request an electrician in Burbank

Tell us the address, the problem, a photo of the panel or damage and the time window that suits you. Then call, or send the form.
(213) 322-0128 (general line, not a Burbank office)

Keep Water and Electricity Apart

We hope you and your loved ones are safe after the recent flooding. Essential safety protocols and guidance for storm preparation and post-flood recovery.

Condition / Environment Electrician Advisory & Action Required
Standing Water Present Never enter standing water to reach a breaker panel, outlet, or appliance. Keep children and pets completely away from flooded electrical areas.
Equipment Contacted Water If water has reached any electrical equipment, leave it powered down and unused until evaluated by a qualified electrician.
Conditions Dry & Safe Have an electrician inspect outdoor outlets, protective GFCI devices, and existing wiring before restoring power or experiencing further severe weather.
Immediate Danger: If there is active sparking, submerged panels, or immediate electrical hazard, move to safety immediately and call 911.
Need Electrical Assistance? Tell us your location and details of what happened. Read our complete storm preparation and recovery guide.
Call (833) 253-6787