Circuit Breaker Repair and Replacement for Tripping or Failed Breakers
Red Electricians finds out why a breaker trips, will not reset or runs hot, and repairs or replaces the breaker. Circuit breaker repair starts from $79, and breaker replacement comes with a free estimate (starting price; your cost may differ).
24/7
Emergency service
About 5 min
Callback after a form request
Licensed & insured
In every city we serve
Request a service
Tell us what you
see, hear or smell.
Tell us what the breaker does, what is running when it trips and whether it feels hot. Then call, or send the form.
- A form request gets a callback in about 5 minutes
- Same-day service is possible in many cases
- We offer 24/7 emergency service
Call any time, 24/7
(213) 322-0128
Request a Service
Tell us the problem and we will call you back in about 5 minutes.
Prefer to talk? Call (213) 322-0128.
Overview
Breaker tripping, hot or won't reset? What to do first
Callers describe it in their own words: the breaker is “popping”, “flipping”, “won’t click back on” or “staying in the middle”. A breaker that keeps tripping is doing its job, so the question is what it is protecting you from. Circuit breaker repair starts from $79, and you can call (213) 322-0128 to talk through the problem. See our full range of electrical services for everything else we do.
Safety first
- If the breaker is hot to the touch, buzzes loudly or you smell burning, stop using that circuit and call us. If there is smoke or fire, call 911.
- Do not keep resetting a breaker that trips again. Report recurring trips instead of forcing it.
- If you are in a rental, tell your landlord, and tell us who can approve the work.
For an urgent problem, see our urgent electrical help page. We offer 24/7 emergency service.
What we do
Breaker repair and replacement services
Every price in this section: starting price; your cost may differ.
Breaker repair
A breaker that trips or will not stay set is tested, and we find whether it is the breaker or the circuit. Starts from $79.
Breaker replacement
A failed breaker swapped for the exact listed type, with the circuit checked first. A free estimate applies to breaker replacement.
AFCI and GFCI breaker replacement
Protective breakers replaced with compatible units.
Wrong-type breaker correction
A breaker that fits the panel but is not the right match, often after a remodel, replaced with the specified one.
Hot-breaker check
A breaker that runs hot is urgent. Call us, and see the safety note above.
Pricing
Circuit breaker repair cost: starting at $79 and what changes the price
How much does circuit breaker repair cost? It starts from $79. Replacing a breaker comes with a free estimate. The price depends on whether the fault is in the breaker or in the circuit.
We do not quote a total over the phone, but we explain the price on the call and before the work starts.
Every price in this section: starting price; your cost may differ.
| Service | Starting price | What changes the final price | Estimate |
|---|---|---|---|
| Circuit breaker repair | From $79 | Whether the fault is the breaker or the circuit, access, and checking the branch | Not free; quoted on the call |
| Circuit breaker replacement | See the estimate | Breaker availability, the type needed and checking the branch | Free estimate |
Decision guide
Breaker, GFCI, appliance or panel: where is the fault?
| The breaker | A GFCI or AFCI device | The appliance | The panel or an overloaded circuit | |
|---|---|---|---|---|
| Telltale sign | Will not stay set, runs hot or feels loose | The reset button on an outlet has popped | The same appliance trips it every time | Several breakers misbehave, or the breaker trips whenever the load is high |
| Who fixes it | We repair or replace it | We repair or replace it | The appliance maker, once we rule out the circuit | We look at the panel or the circuit |
| Page | This page | Outlet repair | Not an electrical repair | Panel repair or when the panel needs more capacity |
Read our guide to the common causes of a tripping breaker for the longer explanation.
The visit
How a technician finds and fixes the faulty breaker
- Call us, or send the form. A form request gets a callback in about 5 minutes. A photo of the panel and of the breaker can help.
- Tell us what the breaker does, what is running when it trips, and whether it is a rental.
- We agree a time. Same-day service is possible in many cases, and if not, it is usually the next day or within a few days.
- The electrician checks the circuit and the breaker, and isolates the load.
- We discuss the price, and you decide.
- The breaker is repaired or replaced, and the circuit is tested under load.
Field notes
Breaker cases from the field: oven circuit, stuck breaker, wrong type
An oven branch in a home lost power now and then without a visible overload. The owner could describe it happening during the heating cycle, so we reproduced that load. A rated-load test found inconsistent continuity inside the breaker, while its connection to the bus was sound. A breaker is a sealed device, so we replaced it with the exact listed type and checked the branch. The oven completed both preheat and hold. The relevant reference is NFPA 70 (NEC), 240 and 110.
A breaker complaint requires distinguishing device failure from an actual circuit fault.
Our electrician
Our electrician’s advice: give the appliance’s operating stage when you describe an unexplained breaker interruption. Report recurring trips and avoid resetting repeatedly.
A breaker that would not stay set
The customer had reset it several times and assumed the room wiring was damaged. The breaker still would not stay set with its branch disconnected, which showed the device had failed. We replaced it with a listed compatible one and checked the circuit before reconnecting.
The wrong breaker after a remodel
A breaker fitted during a room alteration physically fitted the panel but was not the right match. We compared the labels and the circuit requirements, fitted the specified one and checked the room’s wiring so the new device did not hide another problem.
None of these cases is a breaker that trips because an air conditioner, microwave or charger overloads the circuit. That is a very common reason for trips, and we explain it in the blog linked above.
Availability
Breaker repair coverage and how soon we can come
We repair breakers across our service area. See areas we serve for the full list. Our call center is open 24/7, and emergency service runs 24/7. Same-day service is possible in many cases. If not, it is usually the next day or within a few days. We do not promise a time before we hear about the job.
Customer feedback
What customers say about breaker and panel visits
This comment comes from our Sherman Oaks profile on Google. It is one location, not an average for all of ours.
- Google review
“Our circuit breaker keeps tripping, and I was worried it could be dangerous. Your technician came right away, explained the overload issue, and fixed it safely. I feel so relieved now! Thank you for the quick and reliable work!”
Jovele Samonte · Sherman Oaks profile · 9 months ago
Read what our customers say.
Common questions
Circuit breaker repair FAQ: resetting, fees, GFCI trips and rentals
Is it safe to reset the breaker, or keep flipping it?
A single reset is common. If it trips again, leave it off and call us. Do not keep forcing it. If it is hot or you smell burning, stop using the circuit.
Why does my breaker keep tripping when the AC runs?
The circuit may be overloaded, the breaker may be worn, or there may be a fault. Read common causes of a tripping breaker, then call us.
How do I know whether it is the breaker, a GFCI or the appliance?
A technician tests each. See the table above, and outlet repair if the reset button is on an outlet.
How much does it cost to visit or replace a breaker?
Breaker repair starts from $79. Breaker replacement has a free estimate. These are starting prices, and your cost may differ. We give the price on the call.
Can you come today?
Same day in many cases. Otherwise the next day or within a few days. Emergency service runs 24/7.
Do you work on rentals, apartments and shops?
Yes. Landlord approval may come first, so tell us who can authorize the work. See our commercial electrical services.
Are you the electrician or an agency?
We are Red Electricians, a licensed and insured electrical company.
Do you offer a warranty?
Red Electricians offers a standard warranty on its work. Ask your technician for the details when you call.
Request breaker service
Tell us what the breaker does, what is running when it trips and whether it feels hot. Then call, or send the form.