Whole-House Surge Protector Installation at Your Panel
Red Electricians installs a whole-house surge protector at your electrical panel to limit voltage spikes reaching your home. Installation starts from $99, with the protector included (starting price; your cost may differ).
24/7
Emergency service
About 5 min
Callback after a form request
Licensed & insured
In every city we serve
Request a service
Tell us what you
see, hear or smell.
Tell us what equipment you want to protect and send a photo of the panel. Then call, or send the form.
- A form request gets a callback in about 5 minutes
- Same-day service is possible in many cases
- We offer 24/7 emergency service
Call any time, 24/7
(213) 322-0128
Request a Service
Tell us the problem and we will call you back in about 5 minutes.
Prefer to talk? Call (213) 322-0128.
Overview
Surge protector installation at the panel: what it is and who needs it
Whole-house surge protector installation puts a protective device at your electrical panel. It limits voltage spikes before they reach the circuits in your home. Installation starts from $99, with labor, the surge protector and standard materials included. Non-standard materials cost extra. Call (213) 322-0128 or send the form. See our full range of electrical services for the rest of our work.
Owners usually ask after losing a TV, a freezer or other equipment, or while planning a panel upgrade. For how whole-home protection works, read our blog on whole-house surge protectors.
A surge protector has limits. It cannot promise that nothing will ever fail. Ask your electrician what the device you choose is rated for.
What we do
Protection options we install and where they go
Every price in this section: starting price; your cost may differ.
Panel-mounted whole-home device
A listed surge protective device connected at your panel. Starts from $99.
Protection added during a panel upgrade
The device goes in as part of the inspected panel work.
Detached office or outbuilding
A separate plan where power and incoming lines both reach the building.
Sensitive electronics and home theatre
Protection set up for equipment that is costly to replace.
Pricing
What whole house surge protector cost depends on
How much does it cost to have a surge protector installed? It starts from $99. That covers labor to install, the surge protector and standard materials. Non-standard materials are extra.
We give the price on the phone. Panel replacement and capacity are priced separately on our panel upgrade page.
Every price in this section: starting price; your cost may differ.
| Service | Starting price | What changes the final price | Estimate |
|---|---|---|---|
| Surge protector installation | From $99 | The device type and rating, the panel brand and free space, whether a panel upgrade is needed, protection for communications lines and access | Quoted on the call |
Decision guide
Panel-level or outlet-level protection: how the options differ
| Whole-house device at the panel | Plug-in protection at the outlet | |
|---|---|---|
| Where it goes | At your electrical panel | Where the equipment plugs in |
| What it protects | The circuits fed from that panel | Only what is plugged into it |
| Who installs it | An electrician | You |
| Limit | It has ratings and does not cover every cause of failure | It only covers one outlet or strip |
Either can be used. The two do different jobs, and some homes use both. Our technician can tell you which fits.
The visit
How an installation visit works, from assessment to status check
- Call us, or send the form. A form request gets a callback in about 5 minutes. A photo of the panel helps.
- We agree a time. Same-day service is possible in many cases, and if not, it is usually the next day or within a few days.
- The electrician checks the panel, the free space and the grounding.
- The device is chosen to suit the system.
- It is installed with the power off at the panel. Tell us how long you can be without power, and we plan around it.
- We check the connections and show you the status indicator and what it means.
The technician gives you the time for the job on the call.
Field notes
Field notes: home theatre, detached office and a panel upgrade
A home with sensitive entertainment equipment had no surge protection at the panel, and the owner wanted a plan after nearby equipment was damaged. The panel had a suitable connection position and a verified ground. We installed a listed device that suits the system, following its connection layout, and showed the owner its status display. The panel did not need replacing. The job was screened for permit needs and the required inspection was documented. The relevant reference is NFPA 70 (NEC), 242 and 110.
The connection arrangement matters to a surge device as well as its advertised rating.
Our electrician
Our electrician’s advice: ask how the installed device signals when it needs attention.
A detached office
A detached office had more than one way for a surge to reach its equipment, so a power strip alone would not do. We identified the power and communications entries, picked compatible protection, documented the ground and gave the owner a diagram of what was installed. It is a plan for the connections we assessed, not a promise against lightning or every failure.
Surge protection added with a panel upgrade
A panel upgrade was already being isolated and inspected, so we added a surge protective device as part of that work. It was connected to the device’s instructions, and the owner watched the status indicator at handover.
Availability
Where we install surge protection and how booking works
We install surge protectors across our service area. See areas we serve. We have Google profiles for Palm Springs, Yorba Linda, Sherman Oaks, Montecito, Pasadena and Topanga. Elsewhere we serve as a service area with no local office. The call center answers 24/7.
Buena Park is service coverage only. We have no office there.
Customer feedback
What customers say about our electrical work
No review is about a surge protector installation. This comment from our Sherman Oaks profile is about repeat surges in a home, so it is a related job. The profile is rated 4.9 from 52 Google reviews (checked Oct 8, 2026). It is one location, not an average for all of ours.
- Google review
“We were getting repeat electric surges. They tested everything and fixed the cause of it. Bye, bye power issues!”
Krizel Villafuerte · Sherman Oaks profile · 10 months ago
Read what our customers say.
Common questions
Surge protection questions answered before you book
How much does surge protector installation cost?
It starts from $99, with labor, the protector and standard materials included. Non-standard materials are extra. It is a starting price and your cost may differ.
Do I need an electrician to install a whole-house surge protector?
Yes. It connects at the panel, so it needs an electrician.
Is it worth it?
It depends on your home and equipment. Our blog post on whole-house surge protectors explains how it works.
Does it protect everything?
No. A device has defined ratings and does not cover every cause of failure. Ask us what the device you choose is rated for.
Does it need a panel upgrade?
Often not. In our November 2025 case, the panel stayed. If your panel is old or full, we say so. See electrical panel upgrade.
How long does installation take?
It depends on the home. The technician gives you the time on the call.
Do you offer a warranty?
Red Electricians offers a standard warranty on its work. Ask your technician for the details when you call.
Request surge protector installation
Tell us what equipment you want to protect and send a photo of the panel. Then call, or send the form.